Home Page

Turners
  Static
  Portable
  Pop-Ups
  Tactical

Target Limo

Package

Timers

FAQs

Price List

Contact Us

Beacon Target Turner
BSM: BEACON STATIC MASTER
This depicts the static master as a stand alone 2 position portable unit. Due to its low center of gravity and the height of the targets, the system must have some type of support so it won't tip over in windy conditions. If ordered as a portable system, outriggers will be supplied.

The static master was originally designed for permanent installation (mounting pads replace the outriggers), however, it is also well suited for portable use.

The BEACON STATIC MASTER presently is constructed in 4 standard sizes (40", 48", 54" and 60") and size is determined by distance of separation from center of one target to the center of the other target. A sampling of Beacon Static Master Codes with explanation is listed below:

SM-240 Static Turners will have targets 40" on center
BSM-248 Static Turners will have targets 48" on center
NOTE:  Other sizes can be provided as special order at your request.
BSS: BEACON STATIC SLAVE
The BEACON STATIC SLAVE shown below is a single position add-on to the static master. The Slave Turner must be bolted to the Static Master because it can not turn itself. The BEACON STATIC SLAVE presently is constructed in 4 standard sizes (40", 48", 54" and 60") and size is determined by distance of separation from center of one target to the center of the other target. A sampling of the Beacon Static Slave Codes with explanation is listed below:
BSS-140 The slave will have 1 target holder for a system 40" on center
BSS-148 The slave will have 1 target holder for a system 48" on center
BEACON STATIC MASTER SYSTEM
The Static Master is the power unit and the start of a static system that can be expanded up to 6 turners using the Master and up to 4 Slaves. The slaves have no ability to turn on their own and are bolted to the master and connected with a rod. In combination the Beacon Static System can be built up from 2 to 36 positions. Please call for further information.

TARGET HOLDERS
The standard target holders are 24" wide and hold a pair of 1"x 2" strips of lumber giving you the ability to use your targets and adjust the height.